PEG-1

• Generate or boost Exhaust Volume with this simple option

Our Pneumatic Exhaust Generator is easy to install and use. This efficient design has no moving parts so it can never wear out and supplies the required exhaust flow for one Laurell spin processor. The only requirement is a CDA or N2 pressure source

An exhaust flow is created when 25–100psi (1.7–6.9 bar) of a gas is supplied to the generator. The flow is created by a Coanda effect and by varying the input pressure a differential pressure of 0.5"–3.5"H₂O can be achieved. 50 psi (3.4 bar) generates a volumetric flow rate of approximately 20 CFM (0.57 M³/min.)

It is easy to clean and disassemble, if necessary.